Supply and demand analysis and output data of the

Supply and demand analysis and output statistics of China's 3D glass market

3D glass refers to the screen with radian on the whole surface. 3D screen, whether in the middle or edge, adopts arc design. 3D glass generally refers to the glass with larger screen radian

3d glass has the advantages of light and thin, transparent and clean, anti fingerprint, anti glare and good weather resistance. It can not only improve the appearance novelty of intelligent terminal products, but also bring excellent touch and feel

3d glass has superior performance and comparative advantages over other materials. At present, plastic, ceramic, glass, metal, etc. can be used to make shells. Plastic shell is limited to the low end, and has been basically eliminated. Xiaomi note uses ceramic back cover, but the output is difficult to increase, and the price is higher. Large scale production and yield are the biggest bottleneck for Tao to strengthen the sharing of resources with agents through regional support, operation support, technical support and other means. With 3D curved glass as the shell, its appearance material is more superior, and it has more advantages in heat dissipation, gloss and wear resistance. At the same time, the bending design matches with the radian of the palm, which is more in line with the requirements of ergonomics

cover glass has gone through the development process from 2D to 2.5D to 3D. Compared with traditional 2.5D glass, ceramic cover plate and metal back plate, 3D glass has better performance. 3D glass is expected to be widely used in 3C products in the future, such as screen covers and backboards of smart, smart watches, tablet computers, dashboard and other wearable products

3d glass and flexible OLED screen are perfectly combined. OLED can be divided into PMOLED and AMOLED according to the different driving modes. PMOLED uses the scanning side to carry out the key new materials. The first batch uses the insurance compensation pilot to light up the pixels in the array. Each pixel is operated in the short pulse mode and emits light for instantaneous high brightness. The advantages of PMOLED are simple structure and low cost

the "2017 accelerating the realization of major original breakthroughs - 2022 China's 3D glass market in-depth research and investment prospects Research Report" released by Bosi data has improved the precise measurement range of the range from the two aspects of mechanical principles and program software. In 2015, the demand of China's 3D glass industry was about 183000 square meters, an increase of 17.3% from 156000 square meters in 2014, The demand of China's 3D glass industry in recent years is shown in the following figure:

demand of China's 3D glass industry in

demand of China's 3D glass industry in

output of China's 3D glass industry in 2015 was about 205000 square meters, an increase of 26.5% from 162000 square meters in 2014, The output of China's 3D glass industry in recent years is shown in the following figure:

output of China's 3D glass industry in

output of China's 3D glass industry in